How do I connect the Linksys PAP2 adapter?

Please look through the Install kit and make sure that you find the 2 following items:

(1) Linksys Phone Adapter with 2 ports for Voice-over-IP pre-configured for Easyvoipcall
(2) Instructions on How to set up your Easyvoipcall broadband phone

This setup should take approximately 5 minutes to complete:

Step 1: Take the Linksys phone adapter out of its box and plug your regular telephone into the adapter. It can be any type of phone as long at it is a touchtone. (Figure 1).

pap2
Figure 1

Step 2: Plug your Ethernet cable into the port labeled Ethernet and make sure the other end of the cable is plugged correctly into your broadband high speed modem and that it is powered on and working correctly (Figure 2).

pap2
Figure 2

Step 3: Log into the portal, choose “programming devices” from the left menu and enter the linksys MAC address (writen on the device). Choose “generate” and “save”. You will be given an http string (http://www..) which you will “copy”, wou will then log into linksys / admin / advanced view / provisioning / profile rule and will “paste” the http string and save the configuration.

Step 4: Plug in the power cable into the correct port on the adapter and then plug it into a power source (Figure 3).

pap2
Figure 3

Step 5: Wait until the Power, Ethernet, and Phone line LED’s all light up (Figure 4).

pap2
Figure 4

Congratulations, you are now connected to Easyvoipcall broadband phone service. Feel free to call anywhere in the U.S. or Canada for one low price.

0